This chapter describes Presence Manager (PM) messages. For information on message content and how to use the message, refer to the Introduction.
| PM.001 |
Level: UI-ERROR
Short Syntax: PM.001 Fan fan failed.
Long Syntax: PM.001 Cooling fan fan has failed.
Description: A cooling fan has stopped spinning at the minimum RPM required to provide adequate cooling.
| PM.002 |
Level: U-INFO
Short Syntax: PM.002 Fan fan up to speed.
Long Syntax: PM.002 Cooling fan fan is up to speed.
Description: A cooling fan which had previously failed is now spinning at the minimum RPM required to provide adequate cooling.
| PM.003 |
Level: U-INFO
Short Syntax: PM.003 Pwr Supp power_supply OFF.
Long Syntax: PM.003 Power Supply power_supply is OFF or has failed.
Description: A power supply has been powered-off or has failed.
| PM.004 |
Level: U-INFO
Short Syntax: PM.004 Pwr Supp power_supply ON.
Long Syntax: PM.004 Power Supply power_supply is ON.
Description: A power supply has been powered-on.
| PM.005 |
Level: U-INFO
Short Syntax: PM.005 Thermal thermal Overtemp.
Long Syntax: PM.005 Thermal Sensor thermal is over-temp.
Description: A thermal sensor reading has exceeded the specified threshold.
| PM.006 |
Level: U-INFO
Short Syntax: PM.006 Thermal thermal below thresh.
Long Syntax: PM.006 Thermal Sensor thermal is below warning level.
Description: A thermal sensor reading which had previously exceeded the specified threshold is now below the specified threshold.
| PM.007 |
Level: U-INFO
Short Syntax: PM.007 LIC2 at0 at1 - lic_name detected in slot slot.
Long Syntax: PM.007 LIC2 at0 at1 - lic_name detected in slot slot.
Description: A LIC of the type indicated has been detected in the slot indicated.
| PM.008 |
Level: U-INFO
Short Syntax: PM.008 LIC2 at0 at1 - lic_name extracted from slot slot.
Long Syntax: PM.008 LIC2 at0 at1 - lic_name extracted from slot slot.
Description: A LIC of the type indicated has been extracted from the slot indicated.
| PM.009 |
Level: UE-ERROR
Short Syntax: PM.009 Mechanical Insertion Error, slot slot.
Long Syntax: PM.009 Mechanical Insertion Error in slot slot.
Description: A mechanical insertion error has occurred indicating that the LIC type could not be detected. Re-inserting the LIC is required.
| PM.010 |
Level: UE-ERROR
Short Syntax: PM.010 Unknown LIC Type in slot slot.
Long Syntax: PM.010 Unknown LIC Type detected in slot slot.
Description: The LIC type plugged into the slot does not match any known LIC type.
| PM.011 |
Level: UE-ERROR
Short Syntax: PM.011 LIC2 at0 at1 - lic_name is not valid in slot slot.
Long Syntax: PM.011 LIC2 at0 at1 - lic_name is not valid in slot slot.
Description: The type of the LIC plugged into the slot is not compatible with a LIC present in an adjacent slot. As a result, the LIC will not be enabled and the "Wrong Slot" indicator will be on.
| PM.012 |
Level: UI-ERROR
Short Syntax: PM.012 LIC2 at0 at1 - lic_name in slot slot is defective.
Long Syntax: PM.012 LIC2 at0 at1 - lic_name in slot slot is defective.
Description: The LIC type plugged into the slot is defective.
| PM.013 |
Level: U-INFO
Short Syntax: PM.013 Thermal Overtemp.
Long Syntax: PM.013 Thermal Sensor is Overtemp.
Description: A thermal sensor reading has exceeded the specified threshold.
| PM.014 |
Level: U-INFO
Short Syntax: PM.014 Thermal below Overtemp threshold
Long Syntax: PM.014 Thermal has dropped below Overtemp threshold.
Description: A thermal sensor reading which had previously exceeded the specified threshold is now below the threshold.
| PM.015 |
Level: U-INFO
Short Syntax: PM.015 Extreme Thermal Overtemp
Long Syntax: PM.015 Extreme Thermal Overtemp.
Description: A thermal sensor reading indicates excessively high temperature. This condition may be result in a system shutdown.
| PM.016 |
Level: U-INFO
Short Syntax: PM.016 dev_name (type type) detected in slot slot.
Long Syntax: PM.016 dev_name (type type) detected in slot slot.
Description: A device of the type indicated has been detected in the slot indicated.
| PM.017 |
Level: U-INFO
Short Syntax: PM.017 dev_name (type type) extracted from slot slot.
Long Syntax: PM.017 dev_name (type type) extracted from slot slot.
Description: A device of the type indicated has been removed from the slot indicated.
| PM.018 |
Level: U-INFO
Short Syntax: PM.018 Unknown device in slot dev_name.
Long Syntax: PM.018 Unknown device in slot dev_name.
Description: A device plugged into the slot does not match any known device type.
| PM.019 |
Level: U-INFO
Short Syntax: PM.019 dev_name (type type) is not valid in slot slot.
Long Syntax: PM.019 dev_name (type type) is not valid in slot slot.
Description: A device of the type indicated is not allowed in the slot indicated, and will be not be enabled.
| PM.020 |
Level: U-INFO
Short Syntax: PM.020 dev_name (type type) in slot slot is defective.
Long Syntax: PM.020 dev_name (type type) in slot slot is defective.
Description: The device plugged-in to the slot is defective.
| PM.021 |
Level: U-INFO
Short Syntax: PM.021 Insufficient power for dev_name (type type) in slot slot.
Long Syntax: PM.021 Insufficient power for dev_name (type type) in slot slot.
Description: The device in the specified slot is not powered-on due to insufficient available power due to Power Supply removal, failure, or overload.
| PM.022 |
Level: UI-ERROR
Short Syntax: PM.022 Power Supply fan Fan failed.
Long Syntax: PM.022 Power Supply fan Fan failed.
Description: A power supply fan has stopped spinning at the minimum RPM required to provide adequate cooling.
| PM.023 |
Level: U-INFO
Short Syntax: PM.023 Power Supply fan Fan up to speed.
Long Syntax: PM.023 Power Supply fan Fan up to speed.
Description: A power supply fan which had previously failed is now spinning at the minimum RPM required to provide adequate cooling.
| PM.024 |
Level: U-INFO
Short Syntax: PM.024 Pwr Supp power_supply has Failed.
Long Syntax: PM.024 Power Supply power_supply has failed.
Description: A power supply has failed.
| PM.025 |
Level: U-INFO
Short Syntax: PM.025 Pwr Supp power_supply is OFF.
Long Syntax: PM.025 Power Supply power_supply is OFF.
Description: A power supply has been powered-off.